Remodeling the office (new floor, ceiling & adding insulation) passive house retrofit

strider3700 · 10-30-12, 06:34 PM

On the builditsolar site he has an entry on the netting. If I remember correctly they put it up tight then went out and rolled glue on each stud using a small paint roller to glue the netting down tight and help prevent bulging that will mess up the board. the glue just sucked through the netting so it was probably a quick thing to do and pretty inexpensive.

10-30-12, 06:34 PM	#11
strider3700 Master EcoRenovator Join Date: Dec 2008 Location: Vancouver Island BC Posts: 745 Thanks: 23 Thanked 37 Times in 30 Posts	On the builditsolar site he has an entry on the netting. If I remember correctly they put it up tight then went out and rolled glue on each stud using a small paint roller to glue the netting down tight and help prevent bulging that will mess up the board. the glue just sucked through the netting so it was probably a quick thing to do and pretty inexpensive.